FAP Emulator
FAP Emulator allow:
Install:
To use this electronic device you need to replace the good DPF / FAP filter with a bad FAP which is drilled in advance to enable the flowing of exhaust gas,
or with a custom exhaust system.
1. FAP emulator electronic circuit is installed in place of the original sensor:
2. Good FAP filter it is replaced with a drilled FAP:
3. Additive system it is deactivated to stop injecting Eolys in diesel tank:
- you can even remove the Eolys addive tank from car if you want.
4. Bon voyage.
Link's:
Here you will find the views of those who use on their cars FAP EMU - click
Here you can read some facts and myths about FAP.
FAP Emulator it is a electronic device designed to
allow removal of diesel particle filter - FAP - from cars
with diesel engine.
This electronic device it is tested and installed until now on many cars - with HDI engines: 1.6, 2.0, 2.2...
This electronic device it is tested and installed until now on many cars - with HDI engines: 1.6, 2.0, 2.2...
- Citroen C3, C4, C5, C6, C8 ...
- Peugeot 206, 306, 307, 406, 407, 607 ...
- Ford Focus ...
- Volvo S/Vxx ...
FAP Emulator allow:
- Removal of FAP = diesel particulate filter - without need to reprogram car computers.
- Operation of vehicle on any driving style in city or highway - you don't get any more error messages due to clogging and aging FAP filter and switching the car on safety mode by limiting the engine to 2000rpm, for example: "Risk of blocking filter" ...
- Chip Tunning, computer reprogramming Injection - ECU - with custom software to obtain more engine power - without the risk of rapid clogging of the filter FAP.
- Replacement exhaust system with custom one.
- Saving the budget by need to add Eolys or FAP filter replacement: economy ~ 200 Euro ... 1000 Euro.
- Fuel economy - by increasing the maximum distance between regeneration regardless of car / engine operating mode: urban / highway.
You can see the average distance
between
regenerations over the last 5 cycles and
FAP soot load and distance travelled from
last regeneration.
regenerations over the last 5 cycles and
FAP soot load and distance travelled from
last regeneration.
<- image from left - car with real FAP
image from
right - car with FAP Emulator ->
Install:
To use this electronic device you need to replace the good DPF / FAP filter with a bad FAP which is drilled in advance to enable the flowing of exhaust gas,
or with a custom exhaust system.
1. FAP emulator electronic circuit is installed in place of the original sensor:
2. Good FAP filter it is replaced with a drilled FAP:
3. Additive system it is deactivated to stop injecting Eolys in diesel tank:
- you can even remove the Eolys addive tank from car if you want.
4. Bon voyage.
Link's:
Here you will find the views of those who use on their cars FAP EMU - click
Here you can read some facts and myths about FAP.